EXPLORE MORE CATEGORIES
- Home
- »
- Our Products
- »
- Brass Products
Brass Products
We are engaged in offering wide range of Alloy Brass Products. Our products are corrosion resistant, water repellent and are thermostatically approved. We have client centric approach and satisfy over clients in all respects. Brass alloy products offer wide application in electric motors, backing plate’s castings and welding applications. These also offers main tool in engineering accessories. The wide range offered by us includes Brass Pipes Admiralty Tubes etc.
Naval Brass Rods High Tensile Brass
Product Price: Rs 400 / KilogramGet Best Price
Product Details:
| Shape | Round |
| Surface Treatment | Polished |
| Material | Brass |
| Length | 3-10 m |
Applications:
- Decorative And Architectural Products
- Marine Hardware
Specifications:
| Designation | |
| Czech Republic | CuZn38Sn1 |
| BS | CZ 112 |
| JIS | C 4621 |
C46400 Naval Brass lead Free:
- The lead free naval brass is the result of the composition of 60% copper, 39.2% zinc and 0.8% tin. The addition of tin with zinc results in the high corrosion resistance in sea water. This makes the alloy resistant to dezincification that inhibit the impingement by seawater at higher than normal temperatures. The alloy is also appreciated for its resistance to wear, fatigue, galling, and stress corrosion cracking.
Equivalent Specifications:
| Specifications | Designation |
| ISO | CuZn38Sn1 |
| Europen | CuZn39Sn1 |
| BS | CZ 133 |
| JIS | C 4640 |
| Russian | L060-1 |
C48200 Naval Brass "Medium Lead"
The medium leaded naval brass is used for common fabrication process mainly for marine equipment or the things that is used with water in contact. It is a hard and corrosion resistant material used for both fresh or salt water applications
Equivalent Specifications:
| Specifications | Designation |
| ISO | CuZn37pb1Sn1 |
| Europen | CuZn37pb1Sn1 |
| Czech Republic | CuZn37pb1Sn1 |
| Portugal | CuZn37pb1Sn1 |
C48500 Naval Brass "High Leaded"
The high leaded naval brass is available in compliance with ASTM B21, AMS 4611 standards and is appreciated for high thermal and electrical conductivity. The material is highly ductile and easy to weld and is also appreciated for creeping resistance and low volatility under high vacuum.
Specifications
| Designation | |
| Europen | CuZn36Pb2Sn1 |
| BS | CZ 134 |
| Australia | 485 |
Get Best QuoteRequest A Callback
Brass Tubes
Product Price: Rs 390 / kgGet Best Price
Product Details:
| Material | Brass |
| Unit Length | 6 m - 24 m |
| Hollow Sections | Circular |
| Surface Finished | Polished |
Admiralty Brass Tubes are generally used with fresh, clean waters free from suspended abrasive solids and originating from rivers lakes and canals. The inhibitive action of arsenic protects Admiralty Brass Tubes from dezincification and the fully annealed alloy can also withstand stress-corrosion cracking. In waters containing less than 2000 ppm dissolved solids its use is allowed at flow rates of up to 3 m/s (10 ft/s) in sea waters a maximum speed of 1 m/s (3,0 ft/ s) is recommended. The presences of tin improve resistance to general corrosion in slightly polluted (sulphurised) water.
Specifications:
| Admiralty Brass Tubes Size: |
|
| Chemical Requirements | ADMIRALTY BRASS |
| Copper | 70.0 to 73.0% |
| Tin | 1.0 to 1.5% |
| Arsenic | 0.02 to 0.06% |
| Zinc | Remainder |
| Total Imp. | 0.30% max. |
| Physical Properties | |
| Condition | Hardness |
| Annealed (O) | 75 max |
| Temper Annealed (TA) | 80 to 105 |
| As manufactured (M) | 150 min. |
Aluminium Brass Tubes:
- Aluminium Brass Tubes are generally used with brackish or sea water. Through its arsenic inhibition, it is virtually immune from dezincification and, when fully annealed, also practically free from stress-corrosion cracking. Aluminium Brass Tubes is resistant to pitting and even more so to impingement attack: in fresh water, a velocity of up to 3,5 m/s ( 11, 5 f/s) is admitted; it should be reduced to about 2,5 m/s (8,5 f/s) when operating in sea water.
Specifications:
| Aluminium Brass Tubes Size: |
From: 10.00 MM OD to 50.8 MM OD, with max. thk upto 5 mm |
| Chemical Requirements | ALUMINIUM BRASS | |
| Copper | 76.0 to 78.0% | |
| Aluminium | 1.8 to 2.3% | |
| Arsenic | 0.02 to 0.06% | |
| Zinc | Remainder | |
| Total Imp. | 0.30% max. | |
| Physical Properties | ||
| Condition | T.S.Kg/mm2 | EL% Min |
| Annealed | 30 to 37.5 | 40% |
| Temper Annealed (TA) | 35.50 min. | 35% |
| As manufactured (M) | 46 min. | - |
Get Best QuoteRequest A Callback